North Pump Adapter/Nozzle with silicone sealing ring is compatible with 2013 and newer North kites, and 2014 and newer Cabrinha kites with the Airlock 2 screw valve.

This adapter was built to fit newer model heavy duty pump hoses (2016 and newer.)  The adapter does also fit older model pump hoses (prior to 2016) very tightly but does not lock in like standard OEM adapters.  The adapter can be used as is or may need to be modified by filing down the tiny nub near the ridge of the adapter where it connects to the hose

Big Boston valve (screw valve) pump adapter/nozzle fits on any standard kite pump hose.  It works with several large Boston valves (screw valves) on the market today including Ozone (2011 and newer), and Naish, Crazyfly, and Airush (2015 and newer).

Please note, this is very similar to, but not the same as the Cabrinha adapter, Best 2008 adapter, or North 2014 and newer adapter.  It will probably not work with these three kite brands.

Cabrinha Airlock 1 Screw Valve adapter is compatible with 2013 and older Cabrinha kites as well as 2008 Best kites with EZ screw valves.

Liquid Force Valve Pump Adapter/Nozzle is compatible with 2011 and newer Liquid Force kites with the Max Flow valve.

This adapter was built to fit newer model heavy duty pump hoses (2016 and newer.)  The adapter does also fit older model pump hoses (prior to 2016) very tightly but does not lock in like standard OEM adapters.  The adapter can be used as is or may need to be modified by filing down the tiny nub near the ridge of the adapter where it connects to the hose.

Standard Pump Adapter for 7mm and 9mm Valves is compatible with almost all kites prior to about 2008 as well as many newer kites. Nearly all kites which have a separate inflate and deflate valves are 9mm or 7mm valves. This is also the adapter used for inflating struts on kites without a one-pump system.

This adapter was built to fit newer model heavy duty pump hoses (2016 and newer.)  The adapter does also fit older model pump hoses (prior to 2016) very tightly but does not lock in like standard OEM adapters.  The adapter can be used as is or may need to be modified by filing down the tiny nub near the ridge of the adapter where it connects to the hose.

Threaded Big Boston valve (screw valve) pump adapter/nozzle fits on any standard kite pump hose. It works with several large Boston valves (screw valves) on the market today including Ozone (2011 and newer), and Naish, Crazyfly, and Airush (2015 and newer), and Switch kites. This adapter screws onto the top of the Boston valve for a more secure fit compared to the friction-fit adapters typically found on most pumps.

Inflate / Deflate Kite Screw Valve Cap

Its always good to have a backup!

Cabrinha Airlock 1 Screw Cap
The Airlock high volume one way valve is a Cabrinha exclusive. While inflating, the one way valve does not allow air to escape, even when the pump nozzle is pulled out. The extra large opening allows for even the largest kites to be pumped up in minutes. By unscrewing the deflation cap the kite will deflate and be ready to be rolled up in seconds. The Airlock valve is secured to the leading edge with an “O” ring so the bladder is not able to spin inside of its casing. The threaded valve cap makes it virtually impossible for the accidental opening of the valve during an impact on land or water.  For use with 2013 and prior Cabrinha valves and is also compatible with 2008 Best EZ pump.

Cabrinha Airlock 2 Screw Cap

2011+ Ozone Boston Inflate/Deflate Valve Red Cap